İçeriğe geç

Studio output

Bu içerik henüz dilinizde mevcut değil.

Studio turns your 3D scene into product imagery. The saved cameras you authored become repeatable output shots, and the same scene produces a 360° turntable video. One scene and one lighting setup produce a whole media set.

Adım 1/7

Ürün fotoğrafı genellikle ayrı bir gider kalemidir ve her renk için aynı açı ve aynı ışık gerekir. Burada görseller zaten yaptığınız çalışmadan üretilir.

Stüdyo çıktısı: görsel ve 360° video
Adım 1 / 7
  1. Ürün fotoğrafı genellikle ayrı bir gider kalemidir ve her renk için aynı açı ve aynı ışık gerekir. Burada görseller zaten yaptığınız çalışmadan üretilir.
  2. Kamera panelini açın. Stüdyo çıktısı, render aldığı kameraların yanında yer alır.
  3. Studio 3D sahneyi teslim edilebilir görsellere dönüştürür: tek sahne, tek aydınlatma kurulumu, eksiksiz bir görsel seti.
  4. Çözünürlüğü 4K’ya kadar, en-boy oranını, dosya biçimini ve arka planı bir kez ayarlayın. Setteki her kare aynı ayarlarla çıkar.
  5. Hi-Res Photo bu ayarlarla tek bir yüksek çözünürlüklü kare alır. Ana ürün görselini doğrudan sahneden üretir.
  6. Record 360° Video, seçtiğiniz sürede ürünün dönen bir videosunu üretir. Video ürün sayfasında ya da pazar yeri ilanında kullanılabilir.
  7. Render All Saved Cameras tüm çekim listesini tek geçişte dışa aktarır. Ürün sonra değişirse seti yeniden almak, yeniden çekim yerine tek tık.
  1. Author saved cameras for the shots you need, such as front, three-quarter and detail (see Views & cameras). Batch output requires at least one saved camera.
  2. Set the resolution (presets from 720p up to 4K, a 1:1 option, or exact width and height), the file format (PNG or JPEG), the background (a solid colour or the scene environment) and the render quality.
  3. Capture what you need:
    • Frame: a quick capture at the current viewport.
    • Hi-Res Photo: a single high-resolution still at your chosen settings.
    • Record 360° Video: a turntable of the product over a duration you choose.
    • Render All Saved Cameras: batch output that applies each saved shot, captures it with the current settings, then restores your previous camera state. Your editing session continues exactly where it was.

Consistent product imagery is usually a photography line-item, with the same angles and the same light for every colorway. Here it comes from work you already did. The saved cameras are the shot list, the scene lighting is the studio, and re-rendering after a product update is one click instead of a reshoot.

Combined with the configurator, the same recipe produces imagery per variation. Swap the finish and render the same saved cameras again.

  • Name saved cameras as shot names (Hero 3-4, Detail stitching), so the output set describes itself.
  • Create a dedicated preview camera for Studio preview output rather than borrowing your working camera.
  • Keep one background per image set for consistency.